Difference between revisions of "Debian Trinity Repository Installation Instructions"

From Trinity Desktop Project Wiki
Jump to navigation Jump to search
imported>Eliddell
(Update stable versions for R14.1.2)
 
(59 intermediate revisions by 8 users not shown)
Line 1: Line 1:
== Debian Trinity Repository Installation Instructions ==
 
 
[[Category:Documentation]]
 
[[Category:Documentation]]
  +
[[Category:Installation]]
   
  +
This page provides instructions to '''install''', '''upgrade''' or '''remove''' Trinity Desktop Environment on your Debian system.
===1. Add these lines to your /etc/apt/sources.list file:===
 
  +
__FORCETOC__
   
  +
=Available versions=
====For Lenny [Debian 5.0] (v3.5.12)====
 
   
  +
==TDE R14.x.y series==
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity/debian lenny main
 
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity/debian lenny main
 
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps/debian lenny main
 
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps/debian lenny main
 
   
  +
===Stable versions===
[http://www.trinitydesktop.org/installation_lenny.php Please visit this page for additional instructions required for Debian Lenny]
 
   
  +
Packages for stable versions are available for the following Debian distributions (green rows indicates latest version):
====For Squeeze [Debian 6.0] (v3.5.13.2)====
 
   
  +
{| class="wikitable"
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian squeeze main
 
  +
! Version
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian squeeze main
 
  +
! Architectures
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.13/debian squeeze main
 
  +
! Notes
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.13/debian squeeze main
 
  +
|-style="background:lightgreen"
  +
| 12.x - bookworm
  +
| amd64, i386, ppc64el, arm64, armhf
  +
|
  +
|-style="background:lightgreen"
  +
| 11.x - bullseye
  +
| amd64, i386, ppc64el, arm64, armhf
  +
|
  +
|-style="background:lightgreen"
  +
| 10.x - buster
  +
| amd64, i386, ppc64el, arm64, armhf
  +
|
  +
|-
  +
|
  +
| armel
  +
| up to R14.0.13
  +
|-
  +
| 9.x - stretch
  +
| amd64, i386, ppc64el, arm64, armhf
  +
| up to R14.1.1
  +
|-
  +
|
  +
| armel
  +
| up to R14.0.13
  +
|-
  +
| 8.x - jessie
  +
| amd64, i386, ppc64el, arm64, armhf, armel
  +
| up to R14.0.11
  +
|-
  +
| 7.x - wheezy
  +
| amd64, i386, armhf, armel
  +
| up to R14.0.10
  +
|-
  +
| 6.x - squeeze
  +
| amd64, i386, armel
  +
| up to R14.0.6
  +
|}
   
  +
===Rolling versions===
====For Wheezy [Debian 7.0] (v3.5.13.2)====
 
   
  +
Rolling builds are available for a broader set of versions, including <span style="color:#0000ff">testing</span> and <span style="color:#0000ff">sid</span>.
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main
 
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main
 
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.13/debian wheezy main
 
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.13/debian wheezy main
 
   
  +
* [[Preliminary_Stable_Builds|Preliminary Stable Builds]] - rolling version of current stable branch (maintenance releases)
===2. Add the GPG signing key:===
 
  +
* [[Preliminary_Testing_Builds|Preliminary Testing Builds]] - rolling version of main development branch (major/minor releases)
   
sudo apt-key adv --keyserver keyserver.quickbuild.pearsoncomputing.net --recv-keys 2B8638D0
 
   
  +
<div class="mw-collapsible mw-collapsed">
===3. Install Trinity:===
 
  +
==TDE v3.5.13.x==
  +
<div class="mw-collapsible-content">
  +
Packages for older TDE versions are available for the following Debian distributions:
   
  +
{| class="wikitable"
sudo apt-get update
 
  +
! Version
sudo apt-get install desktop-base-trinity kde-trinity
 
  +
! Architectures
  +
! Notes
  +
|-
  +
| 7.x - wheezy
  +
| amd64, i386, armel, armhf
  +
| up to v3.5.13
  +
|-
  +
| 6.x - squeeze
  +
| amd64, i386, armel
  +
| up to v3.5.13
  +
|-
  +
| 5.x - lenny
  +
| amd64, i386
  +
| up to v3.5.12
  +
|}
  +
</div></div>
  +
  +
=Configure the package manager=
  +
  +
Add the following lines to your /etc/apt/sources.list file.
  +
  +
{{WarningBox
  +
|text=Make sure to replace <span style="color:#0000ff">'''<your-distribution-release-name>'''</span> with your actual distribution release name (for example 'bullseye' or 'buster')
  +
}}
  +
  +
===TDE R14.1.x series===
  +
<syntaxhighlight lang="sourceslist">
  +
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.1.x <your-distribution-release-name> main deps
  +
  +
# Optional sources
  +
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.1.x <your-distribution-release-name> main deps
  +
</syntaxhighlight>
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
===TDE R14.0.x series===
  +
<div class="mw-collapsible-content">
  +
<syntaxhighlight lang="sourceslist">
  +
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.0.x <your-distribution-release-name> main
  +
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main
  +
  +
# Optional sources
  +
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.0.x <your-distribution-release-name> main
  +
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main
  +
</syntaxhighlight>
  +
</div></div>
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
===TDE v3.5.13.x===
  +
<div class="mw-collapsible-content">
  +
<syntaxhighlight lang="sourceslist">
  +
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-v3.5.13 <your-distribution-release-name> main
  +
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-v3.5.13 <your-distribution-release-name> main
  +
  +
# Optional sources
  +
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-v3.5.13 <your-distribution-release-name> main
  +
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-v3.5.13 <your-distribution-release-name> main
  +
</syntaxhighlight>
  +
</div></div>
  +
  +
=Import GPG signing key=
  +
  +
The best way to install GPG key is to manually download and install package <code>trinity-keyring</code>. The advantage is that this method of installation is not dependent on the availability of the key server. Another advantage is that the key is not integrated into the global apt keyring, but is installed as a separate file:
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ wget http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-keyring.deb
  +
$ sudo dpkg -i trinity-keyring.deb
  +
</syntaxhighlight>
  +
  +
=Install Trinity=
  +
* If you are doing a '''fresh TDE installation''', please follow the steps listed below.<br>
  +
* If you are '''upgrading''' from an existing version, please follow the instruction under the [[#TDEUpgrade|upgrading]] section.<br>
  +
  +
==Fresh installation==
  +
  +
The following steps are suggested for installing the latest version.
  +
  +
{{WarningBox
  +
|text=<span style="color:#0000ff">''tde-trinity''</span> package is a comprehensive meta-package. To install a minimalist environment, replace <span style="color:#0000ff">''tde-trinity''</span> with <span style="color:#0000ff">''tdebase-trinity''</span> in the instructions below.
  +
}}
  +
  +
===TDE R14.x.y series===
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get update
  +
$ sudo aptitude install tde-trinity
  +
</syntaxhighlight>
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
===TDE v3.5.13.2===
  +
<div class="mw-collapsible-content">
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get update
  +
$ sudo aptitude install kde-trinity
  +
</syntaxhighlight>
  +
</div></div>
  +
  +
===Localization===
  +
{{TipBox
  +
|text=After installing the environment, it is also a good idea to install the localization packages so that you can switch the environment to your native language. For example, for Czech you would run: <syntaxhighlight lang="shell-session">$ sudo aptitude install tde-i18n-cs-trinity</syntaxhighlight>
  +
}}
  +
  +
  +
==<span id="TDEUpgrade"></span>Upgrading from an existing installation==
  +
  +
The following steps are suggested for upgrading to the latest version.
  +
  +
{{TipBox
  +
|text=Before upgrading from v3.5.13.x (or even KDE3), please make sure to go through this [[Tips_And_Tricks|page]] for useful tips suggested by other TDE users.
  +
}}
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get update
  +
$ sudo aptitude full-upgrade
  +
</syntaxhighlight>
  +
  +
This will upgrade TDE to the newer version and should complete smoothly.
  +
  +
If you are upgrading from an existing R14.0.x installation, you are done.
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
If you are upgrading from v3.5.13.x, after these two steps some dummy packages may still be installed on your system and could be safely removed.
  +
<div class="mw-collapsible-content">
  +
To perform such operation, choose one of the following optional steps.<br>
  +
  +
'''A.''' If you had previously installed <span style="color:#0000ff">''kde-trinity''</span>, install the all TDE packages except the development ones as follow.
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo aptitude install tde-trinity
  +
</syntaxhighlight>
  +
  +
'''B.''' If you had previously installed some <span style="color:#0000ff">''kde meta packages''</span>, (such as kde-core-trinity, kdeadmin-trinity, ...) use the command below, where <span style="color:#0000ff">''<tde-equivalent-metapackage>''</span> is the equivalent package in R14.0.x (tde-core-trinity, tdeadmin-trinity, ...). Repeat for all meta packages there had been installed.
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo aptitude install <tde-equivalent-metapackage>
  +
</syntaxhighlight>
  +
  +
'''C.''' Run aptitude in interactive mode, limit the display to <code>~i-trinity~ddummy</code> and manually check/delete/upgrade unneeded packages from the ones displayed.
  +
</div></div>
  +
  +
=Removing Trinity=
  +
  +
{{TipBox | caption = Note | text = Please read the following instructions completely before starting the removal process.}}
  +
  +
Removing the Trinity Desktop Environment involves the following four steps:
  +
  +
# Uninstalling packages
  +
# Removing the Trinity repository from the list of available package sources
  +
# Cleaning up the package cache
  +
# Removing left-over files from your home directory
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
==Uninstalling packages==
  +
<div class="mw-collapsible-content">
  +
  +
===Using aptitude===
  +
  +
If you have ''aptitude'' installed, you can simply run
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo aptitude purge '~i~Otrinitydesktop'
  +
</syntaxhighlight>
  +
  +
===Using apt-get===
  +
  +
Using the standard ''apt-get'' utility to uninstall TDE and its dependencies involves the following three steps:
  +
# Generating a list of all packages available from the Trinity repository
  +
# Using that list to uninstall all installed packages originating from that repository
  +
# Uninstalling all packages that were installed as dependencies of Trinity
  +
  +
To generate a list of all packages available from the Trinity repository, you will need to filter out just the package names from two files in <code>/var/lib/apt/lists</code> and write the result to a new file. The names of these files depend on three factors: The Debian release in use, the processor type the system is running on, and whether you're using the stable series or rolling-release packages. So, for example, when running the R14.1.x series on the i386 variant of Debian bullseye, the names are as follows:
  +
* <code>mirror.ppa.trinitydesktop.org_trinity_deb_trinity-r14.1.x_dists_bullseye_main_binary-i386_Packages</code>
  +
* <code>mirror.ppa.trinitydesktop.org_trinity_deb_trinity-builddeps-r14.1.x_dists_bullseye_main_binary-i386_Packages</code>
  +
  +
First, let's create a new empty file in <code>/tmp</code>, using <code>mktemp</code>:
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ mktemp /tmp/tde.XXXX
  +
/tmp/tde.fB6B
  +
</syntaxhighlight>
  +
  +
Generating a list of all Trinity packages and writing it to that file now works as follows:
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sed -n '/^Package: / s/^Package: //p' /var/lib/apt/lists/mirror.ppa.trinitydesktop.org_trinity_deb_trinity-*Packages > /tmp/tde.fB6B
  +
</syntaxhighlight>
  +
  +
Be sure to replace the output file's name with the actual name of the file <code>mktemp</code> created on your system.
  +
  +
Now that we have a list of all TDE packages, we can hand that to <code>apt-get</code> for uninstallation:
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get remove $(cat /tmp/tde.fB6B)
  +
</syntaxhighlight>
  +
  +
Replace <code>apt-get remove</code> with <code>apt-get purge</code> to also remove the configuration files that came with those packages. And, as above, be sure to replace the output file's name with the actual name of the file <code>mktemp</code> created on your system.
  +
  +
Apt will figure out which of the packages in the list are actually installed and present them for uninstallation. It will also already notify the user of a bunch of packages that "were automatically installed and are not longer required" and suggest using <code>apt autoremove</code> to uninstall them. We will take care of that in the next step. So, for now, just confirm the uninstallation of the TDE packages.
  +
  +
If Apt asks whether to stop the tdm deamon, say yes. We're removing TDE, after all. This will land you on the TTY that TDM was running on before. Need to switch back to the one you ran <code>apt-get</code> from using Ctrl + F1..7.
  +
  +
Finally, to uninstall all remaining Trinity dependencies, you will need to run
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get autoremove
  +
</syntaxhighlight>
  +
  +
In case you also want to remove the configuration files that came with these packages, append <code>--purge</code> to the <code>autoremove</code> command.
  +
  +
{{WarningBox | caption = CAUTION | text = Beware that running <code>apt-get autoremove</code> without care can leave certain software on your system or the system as a whole in an unusable state. The command simply uninstalls all packages that were installed as dependencies of packages that are no longer installed, which might lead to the uninstallation of packages that you wanted to keep.
  +
  +
Be sure to read the list of packages that Apt will want to uninstall, carefully. If you want to continue to use any of the packages in that list, abort the operation, mark that package as manually installed, and then run the command again.
  +
  +
If you're not sure how to handle the situation, ask in the Trinity IRC channel or on the mailing list.}}
  +
</div></div>
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
==Removing the Trinity repository from package sources==
  +
<div class="mw-collapsible-content">
  +
  +
Open <code>/etc/apt/sources.list</code> and either remove the Trinity repository lines or comment them by adding a hash symbol (<code>#</code>) at the beginning of each line. Then save the file and run <code>sudo apt-get update</code>.
  +
</div></div>
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
==Cleaning up the package cache==
  +
<div class="mw-collapsible-content">
  +
  +
If you deactivated/removed the repo from source.list, at least run
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get autoclean
  +
</syntaxhighlight>
  +
  +
This will remove all Trinity packages from the local cache.
  +
  +
To get rid of other packages as well, you'll have to clean out the whole package cache using
  +
  +
<syntaxhighlight lang="shell-session">
  +
$ sudo apt-get clean
  +
</syntaxhighlight>
  +
</div></div>
  +
  +
<div class="mw-collapsible mw-collapsed">
  +
==Removing left-over files from your home directory==
  +
<div class="mw-collapsible-content">
  +
  +
Remove TDE files in <tt>$HOME</tt>. Usually these are the <tt>.tderc</tt> file and the <tt>.trinity</tt> and <tt>.qt</tt> directories. (The latter is still mistakenly used by some applications.)
  +
</div></div>

Latest revision as of 13:04, 21 April 2024


This page provides instructions to install, upgrade or remove Trinity Desktop Environment on your Debian system.


Available versions

TDE R14.x.y series

Stable versions

Packages for stable versions are available for the following Debian distributions (green rows indicates latest version):

Version Architectures Notes
12.x - bookworm amd64, i386, ppc64el, arm64, armhf
11.x - bullseye amd64, i386, ppc64el, arm64, armhf
10.x - buster amd64, i386, ppc64el, arm64, armhf
armel up to R14.0.13
9.x - stretch amd64, i386, ppc64el, arm64, armhf up to R14.1.1
armel up to R14.0.13
8.x - jessie amd64, i386, ppc64el, arm64, armhf, armel up to R14.0.11
7.x - wheezy amd64, i386, armhf, armel up to R14.0.10
6.x - squeeze amd64, i386, armel up to R14.0.6

Rolling versions

Rolling builds are available for a broader set of versions, including testing and sid.


TDE v3.5.13.x

Packages for older TDE versions are available for the following Debian distributions:

Version Architectures Notes
7.x - wheezy amd64, i386, armel, armhf up to v3.5.13
6.x - squeeze amd64, i386, armel up to v3.5.13
5.x - lenny amd64, i386 up to v3.5.12

Configure the package manager

Add the following lines to your /etc/apt/sources.list file.

Messagebox warning.png
Warning!
Make sure to replace <your-distribution-release-name> with your actual distribution release name (for example 'bullseye' or 'buster')

TDE R14.1.x series

deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.1.x <your-distribution-release-name> main deps

# Optional sources
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.1.x <your-distribution-release-name> main deps

TDE R14.0.x series

deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.0.x <your-distribution-release-name> main
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main

# Optional sources
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.0.x <your-distribution-release-name> main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main

TDE v3.5.13.x

deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-v3.5.13 <your-distribution-release-name> main
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-v3.5.13  <your-distribution-release-name> main

# Optional sources
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-v3.5.13 <your-distribution-release-name> main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-v3.5.13 <your-distribution-release-name> main

Import GPG signing key

The best way to install GPG key is to manually download and install package trinity-keyring. The advantage is that this method of installation is not dependent on the availability of the key server. Another advantage is that the key is not integrated into the global apt keyring, but is installed as a separate file:

$ wget http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-keyring.deb
$ sudo dpkg -i trinity-keyring.deb

Install Trinity

  • If you are doing a fresh TDE installation, please follow the steps listed below.
  • If you are upgrading from an existing version, please follow the instruction under the upgrading section.

Fresh installation

The following steps are suggested for installing the latest version.

Messagebox warning.png
Warning!
tde-trinity package is a comprehensive meta-package. To install a minimalist environment, replace tde-trinity with tdebase-trinity in the instructions below.

TDE R14.x.y series

$ sudo apt-get update
$ sudo aptitude install tde-trinity

TDE v3.5.13.2

$ sudo apt-get update
$ sudo aptitude install kde-trinity

Localization

Messagebox info.png
Tip
After installing the environment, it is also a good idea to install the localization packages so that you can switch the environment to your native language. For example, for Czech you would run:
$ sudo aptitude install tde-i18n-cs-trinity


Upgrading from an existing installation

The following steps are suggested for upgrading to the latest version.

Messagebox info.png
Tip
Before upgrading from v3.5.13.x (or even KDE3), please make sure to go through this page for useful tips suggested by other TDE users.
$ sudo apt-get update
$ sudo aptitude full-upgrade

This will upgrade TDE to the newer version and should complete smoothly.

If you are upgrading from an existing R14.0.x installation, you are done.

If you are upgrading from v3.5.13.x, after these two steps some dummy packages may still be installed on your system and could be safely removed.

To perform such operation, choose one of the following optional steps.

A. If you had previously installed kde-trinity, install the all TDE packages except the development ones as follow.

$ sudo aptitude install tde-trinity

B. If you had previously installed some kde meta packages, (such as kde-core-trinity, kdeadmin-trinity, ...) use the command below, where <tde-equivalent-metapackage> is the equivalent package in R14.0.x (tde-core-trinity, tdeadmin-trinity, ...). Repeat for all meta packages there had been installed.

$ sudo aptitude install <tde-equivalent-metapackage>

C. Run aptitude in interactive mode, limit the display to ~i-trinity~ddummy and manually check/delete/upgrade unneeded packages from the ones displayed.

Removing Trinity

Messagebox info.png
Note
Please read the following instructions completely before starting the removal process.

Removing the Trinity Desktop Environment involves the following four steps:

  1. Uninstalling packages
  2. Removing the Trinity repository from the list of available package sources
  3. Cleaning up the package cache
  4. Removing left-over files from your home directory

Uninstalling packages

Using aptitude

If you have aptitude installed, you can simply run

$ sudo aptitude purge '~i~Otrinitydesktop'

Using apt-get

Using the standard apt-get utility to uninstall TDE and its dependencies involves the following three steps:

  1. Generating a list of all packages available from the Trinity repository
  2. Using that list to uninstall all installed packages originating from that repository
  3. Uninstalling all packages that were installed as dependencies of Trinity

To generate a list of all packages available from the Trinity repository, you will need to filter out just the package names from two files in /var/lib/apt/lists and write the result to a new file. The names of these files depend on three factors: The Debian release in use, the processor type the system is running on, and whether you're using the stable series or rolling-release packages. So, for example, when running the R14.1.x series on the i386 variant of Debian bullseye, the names are as follows:

  • mirror.ppa.trinitydesktop.org_trinity_deb_trinity-r14.1.x_dists_bullseye_main_binary-i386_Packages
  • mirror.ppa.trinitydesktop.org_trinity_deb_trinity-builddeps-r14.1.x_dists_bullseye_main_binary-i386_Packages

First, let's create a new empty file in /tmp, using mktemp:

$ mktemp /tmp/tde.XXXX
/tmp/tde.fB6B

Generating a list of all Trinity packages and writing it to that file now works as follows:

$ sed -n '/^Package: / s/^Package: //p' /var/lib/apt/lists/mirror.ppa.trinitydesktop.org_trinity_deb_trinity-*Packages > /tmp/tde.fB6B

Be sure to replace the output file's name with the actual name of the file mktemp created on your system.

Now that we have a list of all TDE packages, we can hand that to apt-get for uninstallation:

$ sudo apt-get remove $(cat /tmp/tde.fB6B)

Replace apt-get remove with apt-get purge to also remove the configuration files that came with those packages. And, as above, be sure to replace the output file's name with the actual name of the file mktemp created on your system.

Apt will figure out which of the packages in the list are actually installed and present them for uninstallation. It will also already notify the user of a bunch of packages that "were automatically installed and are not longer required" and suggest using apt autoremove to uninstall them. We will take care of that in the next step. So, for now, just confirm the uninstallation of the TDE packages.

If Apt asks whether to stop the tdm deamon, say yes. We're removing TDE, after all. This will land you on the TTY that TDM was running on before. Need to switch back to the one you ran apt-get from using Ctrl + F1..7.

Finally, to uninstall all remaining Trinity dependencies, you will need to run

$ sudo apt-get autoremove

In case you also want to remove the configuration files that came with these packages, append --purge to the autoremove command.

Messagebox warning.png
CAUTION
Beware that running apt-get autoremove without care can leave certain software on your system or the system as a whole in an unusable state. The command simply uninstalls all packages that were installed as dependencies of packages that are no longer installed, which might lead to the uninstallation of packages that you wanted to keep.

Be sure to read the list of packages that Apt will want to uninstall, carefully. If you want to continue to use any of the packages in that list, abort the operation, mark that package as manually installed, and then run the command again.

If you're not sure how to handle the situation, ask in the Trinity IRC channel or on the mailing list.

Removing the Trinity repository from package sources

Open /etc/apt/sources.list and either remove the Trinity repository lines or comment them by adding a hash symbol (#) at the beginning of each line. Then save the file and run sudo apt-get update.

Cleaning up the package cache

If you deactivated/removed the repo from source.list, at least run

$ sudo apt-get autoclean

This will remove all Trinity packages from the local cache.

To get rid of other packages as well, you'll have to clean out the whole package cache using

$ sudo apt-get clean

Removing left-over files from your home directory

Remove TDE files in $HOME. Usually these are the .tderc file and the .trinity and .qt directories. (The latter is still mistakenly used by some applications.)