Difference between revisions of "Tips And Tricks"
m (→Method 2: autostart TDE components from WM: Added class="wikitable" to table) |
m (→Application tricks: Make Kate commands table collapsed by default) |
||
Line 342: | Line 342: | ||
See the table below for some useful commands: |
See the table below for some useful commands: |
||
− | {|class="wikitable mw-collapsible" |
+ | {|class="wikitable mw-collapsible mw-collapsed" style="width: 100%" |
!Command |
!Command |
||
!Arguments |
!Arguments |
Latest revision as of 20:30, 15 August 2024
This page is meant as a container of tips and tricks collected over time, addressing topics and issues brought up by TDE users.
Also see the users' Frequently Asked Questions page.
Installing Trinity
Tips and tricks relevant to obtaining a well-functioning Trinity installation.
Upgrading from older versions or KDE3
Upgrading from KDE3 or from TDE 3.5.x to R14.0.x
If you are migrating from KDE3 or upgrading from TDE 3.5.x, you can reuse your own settings in TDE R14.0.x. When logging into R14.0.x for the first time, TDE will automatically execute a script which will migrate as many of your KDE3/TDE3.5.x settings as possible. At the end of the process, your KDE3/TDE3.5.x profile will still exist (unchanged) and a new TDE profile will have been created inside the ~/.trinity folder.
Upgrading from an old version (pre Dec/2014)
Depending on your previous version of TDE, the file /etc/trinity/tdm/tdmrc may change from a script-generated file to a config file. It is advisable to accept the newer file if you are upgrading from an old version to TDE >= R14.0.0.
Configuring Trinity
Tips and tricks for custom fine-tuning and configurations.
Using sudo and tdesudo
If you use sudo or a sudo-based distribution (such as Ubuntu), it is highly recommended that you install the tdesudo-trinity package as well. This allows to run programs that require root priviledge from the TDE menu using your own password. If tdesudo-trinity is not installed, you will be asked for the root password instead. More details can be found here.
Un-Bogging down an older system
Your system runs pretty well until Firefox, an office application, or some other application with high CPU usage demands too many cycles and your system then ‘freezes’ for seconds or minutes until the application gets finished.
A simple, but somewhat tedious, solution is to add nice
to the launcher for each. Using LibreOffice as an example, add nice -n 2
before the command:
TDE Menu >> Office >> LibreOffice >> {right click} >> Edit Item
Change the ‘Command’ entry from libreoffice %U
to nice -n 2 libreoffice %U
.
Then find every other entry for LibreOffice (LibreOffice Base, LibreOffice Draw, LibreOffice Math, LibreOffice Impress, etc.) and do the same.
Other ‘usual suspects’ to make nice are: browsers, BitTorrent clients, GUI Diff tools, and, occasionally, PDF viewers.
Generally anything ‘real-time’ you should leave alone (movies, games, editors).
These were used on a Core2 Duo (P7570 @ 2.26GHz, CPU Mark: 926):
Nice level | Application Name |
---|---|
1 | Kmail |
2 | LibreOffice |
3 | Firefox |
4 | qBittorrent |
Assigning a mouse click as part of a keyboard shortcut
There are multiple ways to accomplish this. The best arguably was the first method, which has been lost to time.
In these examples we are trying to achieve:
{Windows Key} + {left mouse click} = Minimize application under mouse cursor
Change what you need to achieve what you want.
Method 1: Lost
As the name says it’s been lost. What is remembered is that:
- No additional software had to be installed
- The change was exceedingly minor.
Method 2: xbindkeys + xdotool
Buggy. This works, but the xdotool command used occasionally leaves an unfinished half-keystroke hanging.
Step 1. Go to:
Trinity Control Center >> Regional & Accessibility >> Keyboard Shortcuts >> Shortcuts Schemes >> Global Shortcuts >> Windows
Set "Minimize Window" to “Win+Space”.
Step 2. Issue these command(s) as root or using sudo:
# apt-get install xbindkeys
# apt-get install xdotool
# apt-get install xbindkeys-config # optional
Step 3. Edit $HOME/.xbindkeysrc.
Add the following lines:
#MinimizeWindowUnderMouse
"xdotool click --clearmodifiers 1 key super+space"
m:0x40 + c:133 + b:1 + release</nowiki>
Step 4. Issue these commands as yourself (not as root):
$ killall xbindkeys
$ xbindkeys
Step 5. To minimize any window:
Move the cursor over a window, hold down the Windows key and click the left mouse button.
Method 3: xbindkeys, dcop and/or gdbus
Basically the same as xbindkeys + xdotool but replacing xdotool with either a dcop or gdbus command. This is probably less ‘buggy’ than xdotool, but unfortunately the writer doesn’t understand enough about either to make this work.
Enabling image thumbnails in Konqueror for external devices opened via popup after plugging in
When an external device (e.g. USB flash drive) is plugged in, choosing "Open in New Window" in the TDE popup window will open the device under the system:/ path prefix. Image thumbnail display is not enabled per default for this location type in Konqueror. To enable image thumbnails for system:/ paths, adhere to the following:
- In Konqueror from the menubar select
Settings >> Configure Konqueror...
. - Select
Previews & Metadata
on the left. - Under
Local Protocols
tick the checkbox forsystem
. - Press
Apply
.
Look and feel
Tips and tricks concerning the appearance of Trinity desktop and applications.
Adding a separator between windows button in the title bar
Open TDE Control Center >> Appearance & Themes >> Window Decorations
and then select the Buttons
tab.
In the middle of the screen there is a list of available buttons. Drag a separator (--- spacer ---
) on the title bar of the sample window, between the buttons where you want to space to appear.
Check the preview in the bottom part of the window and modify again as required.
Confirm when done.
Enlarging Kicker taskbar buttons to only occupy a single row
When the configured Kicker panel size surpasses a certain pixel count, the taskbar will start getting segmented into multiple rows, leading to taskbar buttons being placed in a grid. To prevent this, the minimum height of taskbar buttons can be increased to enforce a single row of taskbar buttons.
To achieve this, you have to add the following line into section [General] in your $TDEHOME/share/config/ktaskbarrc:
MinimumButtonHeight=38
Select a MinimumButtonHeight that matches the pixel size of the Kicker panel as configured in Trinity Control Center >> Desktop >> Panels >> Arrangement
(when the size is set to "Custom").
Restart the Kicker panel after changing the configuration line.
As an example, for a panel height of 38 pixels this adjustment can be done via Konsole (or another terminal emulator) in the following manner:
$ kwriteconfig --file $TDEHOME/share/config/ktaskbarrc --group General --key MinimumButtonHeight 38
$ dcop kicker kicker restart
Hint: you may also additionally set MinimumButtonWidth
in the same group to control how much minimum horizontal space (in pixels) a single taskbar button should occupy on its own.
You have to add the following line into section [menus] in your $TDEHOME/share/config/kickerrc:
ShowMenuTitles=false
You also have to restart Kicker for the change to take effect.
The quickest way to do all of this is via Konsole (or another terminal emulator):
$ kwriteconfig --file $TDEHOME/share/config/kickerrc --group menus --key ShowMenuTitles false
$ dcop kicker kicker restart
Increasing icon size in K-Menu
You have to add the following line into section [menus] in your $TDEHOME/share/config/kickerrc:
MenuEntryHeight=22
You can adjust the number to any icon size you see fit. You have to restart Kicker for the change to take effect.
The quickest way to do all of this is via Konsole (or another terminal emulator):
$ kwriteconfig --file $TDEHOME/share/config/kickerrc --group menus --key MenuEntryHeight 22
$ dcop kicker kicker restart
Using a custom side image for classic K-Menu
The following only applies to the classic K-Menu enabled by setting "TDE menu style" to "Trinity Classic" in the "Menus" section of Trinity Control Center >> Desktop >> Panels
.
- Create
$TDEHOME/share/apps/kicker/pics/
if it doesn't exist. - Place custom
kside.png
andkside_tile.png
files into$TDEHOME/share/apps/kicker/pics/
. - In
Trinity Control Center >> Desktop >> Panels
under "Menus" enable "Show side image".
kside.png
is the side image itself, while kside_tile.png
is the image that fills the space above the side image if the latter does not fully fit the menu.
Hint: you may find the default kside.png and kside_tile.png files within $TDEDIR/share/apps/kicker/pics/.
Changes to the image files will only apply when the Kicker gets restarted. To trigger this, you can use dcop kicker kicker restart
.
Using a custom image for the logout prompt
- Create
$TDEHOME/share/apps/ksmserver/pics/
if it doesn't exist. - Place a custom
shutdownkonq.png
into$TDEHOME/share/apps/ksmserver/pics/
.
Hint: you may find the default image within $TDEDIR/share/apps/ksmserver/pics/.
Use another window manager with TDE
It is possible to use TDE with a different window manager than the one which comes by default. There are a lot of window managers out there, though, so TDE might not recognize their presence and thus not offer them as a choice in the Control Center. This is the case when you can use the advanced methods mentioned here to use TDE with another WM.
Method 1: the easy way
The easy way is, of course, to go to TDE Control Center >> Desktop >> Window decorations
, switch to the Window Manager tab and then select your preferred window manager from the drop-down menu.
Method 2: autostart TDE components from WM
You can autostart Trinity and the components you need if your window manager supports autostart. In this case the window manager is started first. An .xinitrc file can also do the trick.
Make sure your window manager executes the first command (and any of the other ones for other desktop components you might want to use). For a more-or-less complete TDE session use all of them:
Command | Description |
---|---|
starttde | (required) Initializes required Trinity components.* |
kicker & | The Kicker panel. |
kdesktop --waitforkded & | The Desktop. |
khotkeys & | Keyboard shortcuts handler. |
(* Trinity apps would do this anyway, but it's nice to have it ready for them.)
As for starting the WM itself, you can choose to use your window manager's session via your display manager.
Note that this is not considered a full TDE session and that your mileage may vary. For a better way of handling this see Method 2 below.
Method 3: using WM as part of a TDE session
You can make TDE use your window manager instead of TWin by passing an environment variable to the starttde script. This variable is named $TDEWM
and accepts the executable name (or full path) of your window manager. For example, to start TDE with Fluxbox as a window manager:
$ TDEWM=fluxbox startx /opt/trinity/starttde # adjust to your system
$TWIN
variable instead.
To make this permanent:
- If you use a .xinitrc file, then the only thing to do is to put the line there.
- If you use a display manager, you'll need to create a script and an X session file.
Create a script like this one:
#!/bin/sh
export TDEWM=your_window_manager # for R14.0.11 and higher
export TWIN=your_window_manager # for pre-R14.0.11 TDE versions
exec starttde
Replace your_window_manager
with the correct value. Save it and make it executable.
Then, create a .desktop file in /usr/share/xsessions, like this one:
[Desktop Entry]
Encoding=UTF-8
Type=XSession
Name=(Session name)
Comment=(An optional session comment)
Exec=/path/to/the/script/you/just/saved
Insert the values as needed. Save it and logout. From the sessions menu choose the session you just created. Login normally. TDE should start with the window manager of your choice.
Changing alternating row colors
Alternating row colors in Konqueror, KMail, and probably a lot more, can be set in the Colors section of Trinity Control Center:
TCC >> Appearance & Themes >> Colors >> Widget Color >> [Dropdown] Alternate Background in Lists
Application tricks
Tips and tricks concerning Trinity applications (such as KMail, Kopete, Amarok etc.)
Kmail: Sanitize and Decrypt E-Mails
Kmail Sanitize and Decrypt Mails shows an example on how to create a filter in kmail that removes unwanted headers and automaticly decrypts incomming mails.
Kate: Using the built-in command line
You can quickly apply some special settings to an open file without leaving your keyboard, by using the built-in command line in any application that uses the Kate editing part (e.g. Kate itself, KWrite, TDevelop). Press F7 to open it. It will show as a single text field below the document. When you enter a command, it will automatically offer completions, so no need to worry if you are not sure about a command's name (or sometimes even arguments!). Also, the prompt preserves the history of previous successful command runs, which can be navigated using Up/Down movement keys.
You can apply one command per time, the syntax is COMMAND [ARGUMENTS...]
. You can set the values for all the variables that you can set through the modeline comment prefixed with "set-" (see the relevant section in the Kate documentation if unsure).
For example, to automatically replace tabs with spaces you can enter: set-replace-tabs true
.
To set tab width to 4 spaces: set-tab-width 4
.
To change the highlighting to Python: set-highlighting Python
.
Of course, the built-in command line also comes with some more advanced commands. External tools and plugins can also add their own commands! You can get a full list of available commands by running help list
and get help related to a command by running help <command>
.
See the table below for some useful commands:
Command | Arguments | Description |
---|---|---|
help | [command] | Show a help message in a tooltip. If no argument is provided, shows a generic help message on using the command line. If the special argument list is specified, lists all available commands. If a command name is provided, tries to find help information related to that command.
|
char | hex, octal or base 9+1 | Inserts a Unicode or ASCII character based on its numeric value (e.g. 0x1234, x1234, 01231, 1234). |
date | [format string] | Inserts current date according to the specified format string. If invalid, the default (yyyy-MM-dd hh:mm:ss ) is used instead.
|
find | [:[bcerpsw]] string | Finds the first occurrence of string in the document. Modifiers can be specified after the command by appending a ":", e.g. find:se hello . The meaning of the modifiers is: b for searching backwards, c for searching from the current cursor position, e for searching only inside the selection, r for evaluating string as a regular expression, p for showing a prompt each time an occurrence of string is about to be replaced (replace command only), s makes search case-sensitive and w makes search look for whole words only, not substrings.
|
ifind | [:[bcrs]] string | Finds the first occurrence of string interactively. It performs the search again each time a key is pressed.
|
replace | [:[bcerpsw]] string [replacement] | Replaces all occurrences of string with replacement . If replacement is omitted, it is assumed to be an empty string. For explanation of the modifiers see the description of find .
|
indent | NONE | Indent current line or selection by one tab stop |
unindent | NONE | Unindent current line or selection by one tab stop |
cleanindent | NONE | Reset identation of current line or selection |
comment | NONE | Comment current line or selection |
uncomment | NONE | Uncomment current line or selection |
kill-line | NONE | Kills current line, regardless of selection. |
set-indent-mode | number > 0 | Sets the current indentation mode |
set-highlight | string | Set highlighting mode for the current document |
set-tab-width | number > 0 | Set tab width to number spaces.
|
set-indent-width | number > 0 | Set indentation width to number .
|
set-word-wrap-column | number > 0 | Set column on which word wrapping should occur. |
goto | number > 0 | Go to line number .
|
set-icon-border | boolean | Whether to show icon border |
set-folding-markers | boolean | Whether to show folding markers |
set-line-numbers | boolean | Whether to show line numbers |
set-show-indent | boolean | Whether to show indent lines |
set-replace-tabs | boolean | Whether to replace tabs with spaces |
set-remove-trailing-space | boolean | Whether to automatically remove trailing whitespaces. |
set-remove-trailing-space-save | boolean | Whether to remove trailing whitespaces on saving. |
set-show-tabs | boolean | Whether to show tab characters. Has no effect on space characters. |
set-indent-spaces | boolean | Whether to use spaces instead of tabs for indentation. |
set-mixed-indent | boolean | If enabled, enables space-indent and, if indent-width is zero, sets it to tab-width / 2 .
|
set-word-wrap | boolean | Whether to enable word wrapping. |
set-wrap-cursor | boolean | Whether the cursor wraps with the text or can assume arbitrary positions in the document. Lines are automatically compensated with the needed spaces. |
run-myself | NONE | Execute the current document's text in the built-in Javascript interpreter |
Sed-like expressions are also accepted, e.g.:
s/afternoon/abend/g
Useful scripts
A collection of snippets and useful scripts which can help in automating some tasks in TDE.
Lock session and turn off screen
This shell script locks the session and after 3 seconds turns the screen off:
#!/bin/bash
dcop kdesktop KScreensaverIface lock
sleep 3
xset dpms force standby
For a ‘GUI’ you can add an Applet to your Panel that calls the shell script.
Log out of current TDE session
You can log out of the current TDE session and possibly shut down the system automatically (depending on your TDE configuration) using this command:
$ dcop kdesktop default logout <confirm> <type> <mode>
You can append three parameters ("confirm", "type", "mode") to determine the logout behaviour according to the following values:
First parameter: "confirm"
Value | Explanation |
---|---|
-1 | Obey the user's confirmation setting |
0 | Don't confirm, shutdown without asking |
1 | Always confirm, ask even if the user turned it off |
Second parameter: "type"
Value | Explanation |
---|---|
-1 | Select previous action or the default if it's the first time |
0 | Only log out |
1 | Log out and reboot the machine |
2 | Log out and halt the machine |
Third parameter: "mode"
Value | Explanation |
---|---|
-1 | Select previous mode (or the default one, if it's the first time) |
0 | Schedule a shutdown (halt or reboot) for the time all active sessions have exited |
1 | Shut down, if no sessions are active. Otherwise do nothing |
2 | Force shutdown. Kill any possibly active sessions |
3 | Pop up a dialog asking the user what to do if sessions are still active |
Full stop example
This command will log out and halt the machine, killing any sessions and will never prompt the user:
$ dcop ksmserver default logout 0 2 2
There is currently no GUI option for this, but it can be achieved by a simple configuration script.
Create the file '~/.trinity/share/config/power-managerrc' and put the
following two lines inside:
disableSuspend=true
disableHibernate=true
The next time the shutdown dialog is displayed, only the Logout, Shutdown and Restart buttons will be shown.
Freeze, Suspend, Hybrid suspend, Hibernate buttons will not be displayed.
Troubleshooting
Error: TDE mediamanager is not running
You might encounter this error if you try to run KDesktop, Konqueror or any other TDE application that tries to access storage media outside of a standard TDE session (e.g. from a window manager session).
To solve this, add the following lines to your window manager's autostart script:
tdeinit
dcop kded kded loadModule mediamanager
Unable to change display brightness with NVidia cards
If you are unable to change the display brightness, the problem could be the nvidia driver in use. The following tip works for some users and it is worth a try.
In /etc/default/grub add acpi_backlight=vendor
and/or nvidia.NVreg_EnableBacklightHandler=1
to
the variable GRUB_CMDLINE_LINUX_DEFAULT and reboot. Then controlling the display brightness using TDE
and multimedia (or Fn combination) keys should/may work.
Example:
GRUB_CMDLINE_LINUX_DEFAULT="quiet nvidia.NVreg_EnableBacklightHandler=1 acpi_backlight=vendor"
Unable to find mime type application/octet-stream
This error can occur due to a known bug with the TDE MIME system.
There are two known methods to fix this:
Method 1: Graphical
- Go to
TDE Control Centre > TDE Components > File Associations
- Click on the
Add...
button at the bottom - Select the
application
group from the drop-down menu - In the name field type: octet-stream
- Click OK to close the dialog
- Apply the settings
Method 2: Via CLI
$ cat > ~/.trinity/share/mimelnk/application/octet-stream.desktop << EOF
[Desktop Entry]
Comment=octet-stream
Hidden=false
Icon=
MimeType=application/octet-stream
Patterns=
Type=MimeType
EOF