Debian Trinity Repository Installation Instructions
This page provides instructions to install, upgrade or remove Trinity Desktop Environment on your Debian system.
Available versions
TDE R14.x.y series
Stable versions
Packages for stable versions are available for the following Debian distributions (green rows indicates latest version):
| Version | Architectures | Notes |
|---|---|---|
| 11.x - bullseye | amd64, i386, ppc64el, arm64, armhf | |
| 10.x - buster | amd64, i386, ppc64el, arm64, armhf | |
| armel | up to R14.0.13 | |
| 9.x - stretch | amd64, i386, ppc64el, arm64, armhf | |
| armel | up to R14.0.13 | |
| 8.x - jessie | amd64, i386, ppc64el, arm64, armhf, armel | up to R14.0.11 |
| 7.x - wheezy | amd64, i386, armhf, armel | up to R14.0.10 |
| 6.x - squeeze | amd64, i386, armel | up to R14.0.6 |
Rolling versions
Rolling builds are available for a broader set of versions, including testing and sid.
- Preliminary Stable Builds - rolling version of current stable branch (maintenance releases)
- Preliminary Testing Builds - rolling version of main development branch (major/minor releases)
TDE v3.5.13.x
Packages for older TDE versions are available for the following Debian distributions:
| Version | Architectures | Notes |
|---|---|---|
| 7.x - wheezy | amd64, i386, armel, armhf | up to v3.5.13 |
| 6.x - squeeze | amd64, i386, armel | up to v3.5.13 |
| 5.x - lenny | amd64, i386 | up to v3.5.12 |
Configure the package manager
Add the following lines to your /etc/apt/sources.list file.
TDE R14.1.x series
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.1.x <your-distribution-release-name> main
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main
# Optional sources
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.1.x <your-distribution-release-name> main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main
TDE R14.0.x series
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.0.x <your-distribution-release-name> main
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main
# Optional sources
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-r14.0.x <your-distribution-release-name> main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-r14.0.x <your-distribution-release-name> main
TDE v3.5.13.x
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-v3.5.13 <your-distribution-release-name> main
deb http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-v3.5.13 <your-distribution-release-name> main
# Optional sources
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-v3.5.13 <your-distribution-release-name> main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-builddeps-v3.5.13 <your-distribution-release-name> main
Import GPG signing key
The best way to install GPG key is to manually download and install package trinity-keyring. The advantage is that this method of installation is not dependent on the availability of the key server. Another advantage is that the key is not integrated into the global apt keyring, but is installed as a separate file:
$ wget http://mirror.ppa.trinitydesktop.org/trinity/deb/trinity-keyring.deb
$ sudo dpkg -i trinity-keyring.deb
Install Trinity
- If you are doing a fresh TDE installation, please follow the steps listed below.
- If you are upgrading from an existing version, please follow the instruction under the upgrading section.
Fresh installation
The following steps are suggested for installing the latest version.
TDE R14.x.y series
$ sudo apt-get update
$ sudo aptitude install tde-trinity
TDE v3.5.13.2
$ sudo apt-get update
$ sudo aptitude install kde-trinity
Localization
$ sudo aptitude install tde-i18n-cs-trinity
Upgrading from an existing installation
The following steps are suggested for upgrading to the latest version.
$ sudo apt-get update
$ sudo aptitude full-upgrade
This will upgrade TDE to the newer version and should complete smoothly.
If you are upgrading from an existing R14.0.x installation, you are done.
If you are upgrading from v3.5.13.x, after these two steps some dummy packages may still be installed on your system and could be safely removed.
To perform such operation, choose one of the following optional steps.
A. If you had previously installed kde-trinity, install the all TDE packages except the development ones as follow.
$ sudo aptitude install tde-trinity
B. If you had previously installed some kde meta packages, (such as kde-core-trinity, kdeadmin-trinity, ...) use the command below, where <tde-equivalent-metapackage> is the equivalent package in R14.0.x (tde-core-trinity, tdeadmin-trinity, ...). Repeat for all meta packages there had been installed.
$ sudo aptitude install <tde-equivalent-metapackage>
C. Run aptitude in interactive mode, limit the display to ~i-trinity~ddummy and manually check/delete/upgrade unneeded packages from the ones displayed.
Removing Trinity
Removing the Trinity Desktop Environment involves the following four steps:
- Uninstalling packages
- Removing the Trinity repository from the list of available package sources
- Cleaning up the package cache
- Removing left-over files from your home directory
Details of each steps below.
Uninstalling packages
Using aptitude
If you have aptitude installed, you can simply run
$ sudo aptitude purge '~i~Otrinitydesktop'
Using apt-get
Using the standard apt-get utility to uninstall TDE and its dependencies involves the following three steps:
- Generating a list of all packages available from the Trinity repository
- Using that list to uninstall all installed packages originating from that repository
- Uninstalling all packages that were installed as dependencies of Trinity
To generate a list of all packages available from the Trinity repository, you will need to filter out just the package names from two files in /var/lib/apt/lists and write the result to a new file. The names of these files depend on three factors: The Debian release in use, the processor type the system is running on, and whether you're using the stable series or rolling-release packages. So, for example, when running the R14.1.x series on the i386 variant of Debian bullseye, the names are as follows:
mirror.ppa.trinitydesktop.org_trinity_deb_trinity-r14.1.x_dists_bullseye_main_binary-i386_Packagesmirror.ppa.trinitydesktop.org_trinity_deb_trinity-builddeps-r14.1.x_dists_bullseye_main_binary-i386_Packages
First, let's create a new empty file in /tmp, using mktemp:
$ mktemp /tmp/tde.XXXX
/tmp/tde.fB6B
Generating a list of all Trinity packages and writing it to that file now works as follows:
$ sed -n '/^Package: / s/^Package: //p' /var/lib/apt/lists/mirror.ppa.trinitydesktop.org_trinity_deb_trinity-*Packages > /tmp/tde.fB6B
Be sure to replace the output file's name with the actual name of the file mktemp created on your system.
Now that we have a list of all TDE packages, we can hand that to apt-get for uninstallation:
$ sudo apt-get remove $(cat /tmp/tde.fB6B)
Replace apt-get remove with apt-get purge to also remove the configuration files that came with those packages. And, as above, be sure to replace the output file's name with the actual name of the file mktemp created on your system.
Apt will figure out which of the packages in the list are actually installed and present them for uninstallation. It will also already notify the user of a bunch of packages that "were automatically installed and are not longer required" and suggest using apt autoremove to uninstall them. We will take care of that in the next step. So, for now, just confirm the uninstallation of the TDE packages.
If Apt asks whether to stop the tdm deamon, say yes. We're removing TDE, after all. This will land you on the TTY that TDM was running on before. Need to switch back to the one you ran apt-get from using Ctrl + F1..7.
Finally, to uninstall all remaining Trinity dependencies, you will need to run
$ sudo apt-get autoremove
In case you also want to remove the configuration files that came with these packages, append --purge to the autoremove command.
apt-get autoremove without care can leave certain software on your system or the system as a whole in an unusable state. The command simply uninstalls all packages that were installed as dependencies of packages that are no longer installed, which might lead to the uninstallation of packages that you wanted to keep.
Be sure to read the list of packages that Apt will want to uninstall, carefully. If you want to continue to use any of the packages in that list, abort the operation, mark that package as manually installed, and then run the command again.
If you're not sure how to handle the situation, ask in the Trinity IRC channel or on the mailing list.Removing the Trinity repository from package sources
Open /etc/apt/sources.list and either remove the Trinity repository lines or comment them by adding a hash symbol (#) at the beginning of each line. Then save the file and run sudo apt-get update.
Cleaning up the package cache
If you deactivated/removed the repo from source.list, at least run
$ sudo apt-get autoclean
This will remove all Trinity packages from the local cache.
To get rid of other packages as well, you'll have to clean out the whole package cache using
$ sudo apt-get clean
Removing left-over files from your home directory
Remove TDE files in $HOME. Usually these are the .tderc file and the .trinity and .qt directories. (The latter is still mistakenly used by some applications.)