Revision as of 14:58, 7 August 2018

On this page you can read the instructions to install or upgrade Trinity Desktop Environment on your Debian system.

Available versions and architectures

Official TDE packages are available for the following versions of Debian.

R14.0.x series

9.x - stretch : amd64, i386, armel, armhf, arm64, ppc64el
8.x - jessie : amd64, i386, armel, armhf, arm64, ppc64el
7.x - wheezy : amd64, i386, armel, armhf
6.x - squeeze : amd64, i386, armel

Additionally, unofficial but well-trusted rolling builds are available for a broader set of versions. These are built and maintained by Slávek Banko.

Preliminary Stable Builds - rolling version of current stable branch (maintenance releases)
Preliminary Testing Builds - rolling version of main development branch (major/minor releases)

v3.5.13.2

7.x - wheezy : amd64, i386, armel, armhf
6.x - squeeze : amd64, i386, armel
5.x - lenny : amd64, i386

Configure the package manager

Add the following lines to your /etc/apt/sources.list file.

NOTE 1: make sure to replace <your-distribution> with your actual distribution name.

NOTE 2: deb-src lines following are optional.

TDE R14.0.4

deb http://mirror.ppa.trinitydesktop.org/trinity/trinity-r14.0.0/debian               <your-distribution>  main
deb http://mirror.ppa.trinitydesktop.org/trinity/trinity-builddeps-r14.0.0/debian     <your-distribution>  main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/trinity-r14.0.0/debian           <your-distribution>  main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/trinity-builddeps-r14.0.0/debian <your-distribution>  main

TDE v3.5.13.2

deb http://mirror.ppa.trinitydesktop.org/trinity/trinity-v3.5.13/debian               <your-distribution>  main
deb http://mirror.ppa.trinitydesktop.org/trinity/trinity-builddeps-v3.5.13/debian     <your-distribution>  main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/trinity-v3.5.13/debian           <your-distribution>  main
deb-src http://mirror.ppa.trinitydesktop.org/trinity/trinity-builddeps-v3.5.13/debian <your-distribution>  main

Add the GPG signing key

If necessary (from stretch upwards), install the dirmngr package, which is necessary for gnupg.

sudo apt-get install dirmngr

Then install the TDE official key.

sudo apt-key adv --keyserver keyserver.quickbuild.io --recv-keys F5CFC95C

Install Trinity

If you are doing a fresh TDE installation, please follow the steps listed below.
If you are upgrading from an existing R14.0.x or 3.5.13.x version, please follow the instruction under the upgrading section.

Fresh R14.0.x installation

The following steps are suggested for installing the latest R14.0.x version.

NOTE: tde-trinity package is a comprehensive meta-package. To install a minimalist environment, replace tde-trinity with tdebase-trinity in the instructions below.

TDE R14.0.x series

sudo apt-get update
sudo aptitude install tde-trinity

TDE v3.5.13.2

sudo apt-get update
sudo aptitude install kde-trinity

Upgrading from an existing R14.0.x or v3.5.13.x installation

The following steps are suggested for upgrading to the latest R14.0.x version.

NOTE: Before upgrading from v3.5.13.x (or even KDE3), please make sure to go through this page for useful tips suggested by other TDE users.

sudo apt-get update
sudo aptitude full-upgrade

This will upgrade TDE to the newer version and should complete smoothly.

If you are upgrading from an existing R14.0.x installation, you are done.

If you are upgrading from v3.5.13.x, after these two steps some dummy packages may still be installed on your system and could be safely removed. To perform such operation, choose one of the following optional steps.

A. If you had previously installed kde-trinity, install the all TDE packages except the development ones as follow.

sudo aptitude install tde-trinity

B. If you had previously installed some kde meta packages, (such as kde-core-trinity, kdeadmin-trinity, ...) use the command below, where <tde-equivalent-metapackage> is the equivalent package in R14.0.x (tde-core-trinity, tdeadmin-trinity, ...). Repeat for all meta packages there had been installed.

sudo aptitude install <tde-equivalent-metapackage>

C. Run aptitude in interactive mode, limit the display to '~i-trinity~ddummy" and manually check/delete/upgrade unneeded packages from the ones displayed.

@@ Line 90: / Line 90: @@
 '''NOTE''':  Before upgrading from v3.5.13.x (or even KDE3), please make sure to go through this [[Tips_And_Tricks|page]] for useful tips suggested by other TDE users.
  sudo apt-get update
  sudo aptitude full-upgrade
 This will upgrade TDE to the newer version and should complete smoothly.
@@ Line 100: / Line 98: @@
 If you are upgrading from an existing R14.0.x installation, you are done.
-If you are upgrading from v3.5.13.x, after these two steps, some dummy packages may still be installed on your system and could be safely removed. To perform such operation, choose one of the following optional steps.<br>
+If you are upgrading from v3.5.13.x, after these two steps some dummy packages may still be installed on your system and could be safely removed. To perform such operation, choose one of the following optional steps.<br>
+*'''A.''' If you had previously installed <span style="color:#0000ff">''kde-trinity''</span>, install the all TDE packages except the development ones as follow.
+ sudo aptitude install <span style="color:#0000ff">''tde-trinity''</span>
-*'''A)''' If you have previously installed kde-trinity, use:
- sudo aptitude install tde-trinity
-This will install all Trinity packages except the development ones.
+*'''B.''' If you had previously installed some <span style="color:#0000ff">''kde meta packages''</span>, (such as kde-core-trinity, kdeadmin-trinity, ...) use the command below, where <span style="color:#0000ff">''<tde-equivalent-metapackage>''</span> is the equivalent package in R14.0.x (tde-core-trinity, tdeadmin-trinity, ...). Repeat for all meta packages there had been installed.
+ sudo aptitude install <span style="color:#0000ff">''<tde-equivalent-metapackage>''</span>
-*'''B)''' If you have previously installed some Trinity meta packages (such as kde-core-trinity, kdeadmin-trinity, ...) use:
- sudo aptitude install '''<tde-equivalent-metapackage>'''
-where '''<tde-equivalent-metapackage>''' is the equivalent package in R14.0.x (tde-core-trinity, tdeadmin-trinity, ...).<br>
-This should be repeated for all installed meta packages.
-*'''C)''' Run aptitude in interactive mode, limit the display to '~i-trinity~ddummy" and manually check/delete/upgrade unneeded packages from the ones displayed.
+*'''C.''' Run aptitude in interactive mode, limit the display to '~i-trinity~ddummy" and manually check/delete/upgrade unneeded packages from the ones displayed.

Difference between revisions of "Debian Trinity Repository Installation Instructions"